The Spy addon scans for enemy players and announces their presence when they are detected. By warning you about nearby enemy players you can prepare for possible PvP combat.
The addon scans the combat log for actions performed by enemy players. If an enemy player is detected the addon will attempt to determine their class, race and level based on the ability that was used. The addon will then sound an alert and add the enemy player to its list.
Spy can be configured to announce enemy player encounters to a chat channel and can also be configured to share data with other Spy users in your party, raid or guild. This allows a group of players to share information and determine the location of enemy players over a vast area.
Spy should work as soon as it has been enabled through the Addons window on your character select screen.
The Spy window
The Spy window will initially appear under your character portrait, but can be moved by dragging the title bar. The title bar contains the following buttons:
- Target: Sends the total count of players recently detected to chat. Accuracy is dependent on detection ability and Nearby List settings.
- Clear: Manually clears all enemy players that have currently been detected. Holding the Control key down while clicking this button will enable/disable Spy while leaving it displayed.
- Left/Right: Navigates between the Nearby, Last Hour, Ignore and Kill On Sight lists. Spy is configured by default to switch back to the Nearby list when the next enemy player is detected.
- Close: Hides the Spy window. Spy is configured by default to show itself again when the next enemy player is detected. Alternatively you can type /spy show to manually show the addon.
The Nearby list
As enemy players are detected they will be added to the Nearby list. Clicking buttons in the list will target the enemy player (this only works when you are out of combat). Hovering over entries in the list will display a tooltip with the enemy player's details, including the last seen time and location. Right-clicking buttons displays a drop down menu which will allow you to manually:
- Remove the enemy player from the Nearby list.
- Add/remove the enemy player to/from your Ignore and Kill On Sight lists.
- Announce the enemy player's details to a chat channel of your choice.
- Set multiple Kill On Sight reasons, if the player is on your Kill On Sight list.
If enemy players remain undetected they will be removed from the Nearby list after a configurable amount of time. The Nearby list will always sort by the time each enemy player was initially detected, with those enemy players who are Kill On Sight or actively performing actions being placed at the top of the list.
The Last Hour list
The Last Hour list displays enemy players that have been detected in the last hour. It will always be sorted by the time each enemy player was initially detected, with those most recently detected appearing at the top of the list.
The Ignore list
The Ignore list is where you can place enemy players you have deemed harmless. Spy will not generate any alerts for enemy players on your Ignore list. You can use the drop down menu to add/remove enemy players to/from the Ignore list, or alternatively hold the Control key down while clicking a button in the list to add/remove enemy players.
The Kill On Sight list
The Kill On Sight list is where you place enemy players you especially want to know about. When enemy players on your Kill On Sight list are detected a warning will be displayed and an alarm will sound. You can use the drop down menu to add/remove enemy players to/from the Kill On Sight list, or alternatively hold the Shift key down while clicking a button in the list to add/remove enemy players.
If you can track humanoids then you will be able to detect known enemies by hovering over their position on the minimap. This does not work in battlegrounds and arenas. The level and class of known enemy players is displayed in the minimap's tooltip.
Players who can track humanoids include:
- Druids in cat form
- Those who have eaten a Blackened Worg Steak
Slash command list
/spy : shows the list of slash commands.
/spy enable : enables and displays the Spy window.
/spy reset : resets the Spy window to the default position below the character portrait.
/spy config : opens the Interface Addons window where the Spy configuration options are located.
How can Spy help you?
Not wanting to be ganked
Because Spy will alert you whenever an enemy player is detected, it will be extremely difficult for them to attack you by surprise. It will give you the time to determine whether you should prepare to fight or run away.
Wanting to be the one to do the ganking
If enemy players are not using the Spy addon themselves then it is likely that you will know about them before they know about you. This will let you prepare for attacking them by surprise.
Know when your enemies are nearby
Spy will sound an alarm when a Kill On Sight enemy player is detected. Usually you would add an enemy player to your Kill On Sight list when you are certain they will attack you. Spy will remember who your enemies are and will make sure you know when they are around.
Know when enemy players become stealthed
Spy will warn and sound a specific alert when it detects that an enemy player stealths. You should no longer be surprised by rogues or druids attacking you out of the blue.
Looking for enemy players
Because enemy players will automatically be added to the Nearby list whenever they attempt any action you can use the addon to locate enemy players as you move around a zone. You can also attempt to locate enemy players you have recently encountered by continually clicking their button in the Last Hour list while you move around a zone. The enemy player will be targeted as soon as you move within range. In addition, because you can use the data collected by other Spy users in your party, raid and guild, you stand a greater chance of locating the enemy player you are looking for if you have friends also using Spy.
Getting help when you encounter enemy players
Spy can be configured to announce encounters to a variety of channels, including your party, raid, guild and local defense channels. In addition, other Spy users in your party, raid or guild who are also in the same zone will have your encounters added to their Nearby lists. This is a great way for a guild to track down their enemies.
Getting revenge on an enemy player's guild
Spy is also capable of displaying a warning when a player in the same guild as someone on your Kill On Sight list is detected. This option can be enabled or disabled vis the Interface Addons window.
Knowing how many times you've won/lost against an enemy player
Spy will record when you make a killing blow against an enemy player. Likewise, it will also record when an enemy player makes a killing blow against you. These statistics can be seen in the tooltip that appears when you hover over the enemy player's entry in the list.
Why doesn't Spy work while I am in combat?
The game has security restrictions on what addons can do during combat. Clicking buttons to target enemy players will not work during combat. At the moment, Spy does not display newly detected players in combat either, although this will be corrected in a future release. Spy will still give visual and audio alerts both in and out of combat.
Why does Spy only show a maximum of ten enemy players?
While the ten enemy player limit at any one time could easily be changed, I believe that displaying any more than ten enemy players will make it more difficult for the user to use the information Spy reports. Long lists of enemy players will either take up too much real-estate on screen, or require the introduction of list paging functionality which I believe would make the addon more cumbersome. The limit may be an issue for some users, but it is alleviated by the fact those enemy players who are actively performing actions or who are on your Kill On Sight list will always appear first.
I was just attacked by an enemy player who was stealthed. Why didn't Spy warn me?
If an enemy player doesn't perform any actions reportable in your combat log then Spy will not know they are there. In this case, the enemy player may have gone into stealth far enough away from you that it isn't reported in your combat log. Or the enemy player could have already been stealthed before you arrived in the area you were attacked.
Why can't I target an enemy player Spy has just reported?
The most likely explanation for this - if you aren't in combat - is that a buff has been applied or removed from one enemy player that was granted to them by another enemy player. This may happen, for example, when an enemy player gains the Leader of the Pack buff from a stealthed druid in their party. Spy will alert you to the possible presence of the enemy druid even though that druid did not perform any active action. This may also happen when a buff expires from an enemy player, in which case the other enemy player that granted the buff may not be in the vicinity at all.
Why doesn't Spy work in sanctuaries?
Spy doesn't work in sanctuaries such as Dalaran or Shattrath City because in those places there is no possibility of PvP combat. Any information reported by Spy will be of no use. Unless you like to try to emote your enemies to death...
How can I turn off Spy temporarily?
This can quickly be done by holding the Control key while clicking the Clear button in the title bar, or alternatively by enabling/disabling Spy via the Interface Addons window. You may want to do this when there are a lot of players around and you don't want the list to fill up or to continuously alert you.
I don't want a warning to be displayed or any alerts to sound. How can I turn them off?
Go to Spy's options in the Interface Addons window and open the Alerts section. Both visual warnings and audio alerts can be turned on or off.
Currently enUS and ptBR. Please contact me on this site if you are able to provide translations for other languages. I will introduce other languages in a future release.
Written by Immolation from Cho'gall (US).
Updated by Slipjack.
22 May 2017 - Spy v3.4.1
- Updated Statistics Window for a better representation of the data and columns.
- Added a Tooltip to the Statistics Window.
- Cleaned up old code and fixed some minor issues with normalizing the data.
|File Name||Release Type||Game Version||Downloads||Date|
|Spy v3.4.1||Release||7.2.0||6,565||May 22, 2017|
|Spy v3.4.0a||Release||7.2.0||10,041||May 7, 2017|
|Spy v3.3.17||Release||7.2.0||10,145||Apr 24, 2017|
|Spy v3.3.16||Release||7.2.0||10,111||Apr 12, 2017|
|Spy v3.3.15||Release||7.2.0||10,140||Apr 2, 2017|
|Spy v3.3.14||Release||7.2.0||10,454||Mar 28, 2017|
|Spy v3.3.13||Release||7.1.5||18,422||Jan 21, 2017|
|Spy v3.3.12||Release||7.1.0||12,522||Jan 3, 2017|
|Spy v3.3.11||Release||7.1.0||10,173||Dec 23, 2016|
|Spy v3.3.10||Release||7.1.0||10,984||Dec 9, 2016|
|Spy v3.3.9||Release||7.1.0||10,272||Nov 29, 2016|
|Spy v3.3.8||Release||7.1.0||17,681||Oct 27, 2016|
|Spy v3.3.7||Release||7.1.0||11,122||Oct 25, 2016|
|Spy v3.3.6||Release||7.0.3||18,496||Sep 19, 2016|
|Spy v3.3.5||Release||7.0.3||16,827||Aug 30, 2016|
|Spy v3.3.4||Release||7.0.3||10,315||Aug 19, 2016|
|Spy v3.3.3||Release||7.0.3||12,311||Aug 12, 2016|
|Spy v3.3.2||Release||7.0.3||10,188||Aug 5, 2016|
|Spy v3.3.1||Release||7.0.3||10,185||Jul 29, 2016|
|Spy v3.3.0||Release||7.0.3||12,649||Jul 21, 2016|
|Spy v3.2.11||Release||6.2.4||12,294||Jul 9, 2016|
|Spy v3.2.10||Release||6.2.4||21,085||Mar 26, 2016|
|Spy v3.2.9||Release||6.2.3||10,381||Mar 2, 2016|
|Spy v3.2.8||Release||6.2.3||10,238||Feb 6, 2016|
|Spy v3.2.7||Release||6.2.0||30,476||Jun 27, 2015|
|Spy v3.2.6||Release||6.1.0||10,485||Jun 9, 2015|
|Spy v3.2.5||Release||6.1.0||18,845||Feb 28, 2015|
|Spy v3.2.4||Release||6.0.3||22,432||Nov 20, 2014|
|Spy v3.2.3||Release||6.0.3||10,373||Nov 13, 2014|
|Spy v3.2.2||Release||6.0.3||10,635||Nov 1, 2014|
|Spy v3.2.1||Release||6.0.2||10,437||Oct 23, 2014|
|Spy v3.2.0||Release||6.0.2||12,323||Oct 14, 2014|
|Spy v3.1.6||Release||5.4.8||15,152||Aug 29, 2014|
|Spy v3.1.5||Release||5.4.8||12,180||Jul 25, 2014|
|Spy v3.1.4||Release||5.4.7||21,201||Mar 11, 2014|
|Spy v3.1.3||Release||5.4.2||9,945||Feb 22, 2014|
|Spy v3.1.2||Release||5.4.2||11,173||Jan 28, 2014|
|Spy v3.1.1||Release||5.4.2||6,127||Jan 22, 2014|
|Spy v3.1.0||Release||5.4.0||18,840||Oct 30, 2013|
|Spy v3.0.9||Release||5.4.0||14,885||Sep 10, 2013|
|Spy v3.0.8||Release||5.3.0||11,433||Aug 15, 2013|
|Spy v3.0.7||Release||5.3.0||9,935||Jul 19, 2013|
|Spy v3.0.6||Release||5.3.0||13,971||May 23, 2013|
|Spy v3.0.5||Release||5.2.0||16,965||Mar 7, 2013|
|Spy v3.0.4||Release||5.1.0||14,357||Jan 5, 2013|
|Spy v3.0.3||Release||5.1.0||7,163||Dec 25, 2012|
|Spy v3.0.2||Release||5.1.0||8,966||Dec 5, 2012|
|Spy v3.0.1||Release||5.1.0||3,046||Dec 5, 2012|
|Spy v2.0.2||Release||4.2.0||79,051||Jul 3, 2011|
|Spy v2.0.1||Release||4.1.0||15,225||Apr 30, 2011|
|Spy v1.3||Release||4.0.1||28,660||Oct 18, 2010|
|Spy v1.2||Release||3.3.5||17,696||Aug 2, 2010|
|Spy v1.1||Release||3.3.0||7,874||Jan 19, 2010|
|Spy v1.0||Release||3.1.0||1,435||Jul 26, 2009|
|Spy v0.3||Beta||3.1.0||257||Jun 13, 2009|
|Spy v0.2||Beta||3.1.0||67||Jun 1, 2009|
|Spy v0.1||Beta||3.1.0||171||May 30, 2009|